|
 |
| Working Safely After Storms |
|
| Follow these tips to protect yourself and others from utility hazards when working in storm-damaged areas. |
|
| Use Generators Safely |
| To prevent carbon monoxide (CO) poisoning: |
| • |
Use generators only outdoors in open areas. |
| • |
Keep them at least 20 feet away from doors, windows and vents. |
| • |
If a CO alarm sounds, evacuate the structure and seek fresh air outdoors. |
|
|
| NEVER plug a generator into a wall outlet. A plugged-in generator will send electricity into utility lines. This puts outage repair crews in danger and can delay the restoration of power. |
| Avoid Electrical Hazards |
| • |
Stay out of flooded basements. |
|
| • |
Do not touch electrical appliances or equipment if you are wet or standing in water. |
| • |
If you must work in wet conditions, use tools and extension cords that are suitable for outdoor use, and plug them into ground fault circuit interrupters (GFCIs) for shock protection. |
| • |
If you see a sagging or downed power line, always assume it is energized and dangerous. Stay far away from the line and anything it is contacting, and report it to 911. |
| • |
Avoid walking and driving through floodwaters, as water may hide fallen power lines. |
|
|
| Disconnect Electric Service Before Major Repair Work |
| Before starting demolition or major repairs in a structure with active electric service, contact OG&E at 800‑272‑9741 well in advance. Arrange to have the electric lines and meters properly disconnected. |
|
